View XPC604RRX333LD_926615.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PID9q-604e_D PNS 980218 Motorola Part Numbers Affected: XPC604RRX266LD XPC604RRX300LD XPC604RRX333LD
Application-Specic Information
PowerPC 604e RISC Microprocessor Family: PIDAq-604e and PID9q-604e (Mach5) Part Number Specications
This document denes a unique part number for a PowerPC 604e microprocessor manufactured by Motorola. It describes changes to recommended operating conditions and revised electrical specications, as applicable, from those described in the PowerPC 604e RISC Microprocessor Family: PID9q-Mach5 Hardware Specications. Any functional differences (errata) for these parts from the functional description provided in the PowerPC 604 RISC Microprocessor UserOs Manual (order # MPC604UM/AD) or its addendum (order # MPC604UMAD/AD) are described in a separate Errata List available from your local Motorola sales ofce. Specications provided in this data sheet supercede those in 4/97 Revision of the PID9q-Mach5 Hardware Specications (order #: MPC604E9QEC/D); specications not addressed herein are unchanged. This document is frequently updated; refer to the website at http://www.mot.com/SPS/PowerPC/ for the latest version. Note that headings and tables in this data sheet are not numbered; however, they are intended to correspond directly to the heading or table affected in the general hardware specications. Any additional information (including tables) not included in the hardware specications are noted. Part numbers addressed in this document and a summary of their differences from the general specication are listed in the following table. For more detailed ordering infomation see OOrdering Information for the PB-604e MicroprocessorO on page 2. Part Numbers Addressed by this Data Sheet
Operating Conditions Motorola Part Number CPU Frequency 266 MHz 300 MHz 333 MHz Vdd
IM
IN
TJ (C) 0 to 85 0 to 85 0 to 85
XPC604RRX300LD XPC604RRX333LD
EL
XPC604RRX266LD
1.80 to 2.00V 1.80 to 2.00V 1.80 to 2.00V
Note: The X prex in a Motorola PowerPC part number designates a OPilot Production PrototypeO as dened by Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested and Q.A. inspected on a qualied technology to simulate normal production. These parts have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization from the customer must be on le in the applicable sales ofce acknowledging the qualication status and the fact that product changes may still occur while shipping pilot production prototypes.
Feature Changes
This section summarizes signicant feature changes beween the revision of the PID9q-604e addressed by this document and the previously available revision 1.01 (XPC604RRXnnnPB where nnn is the CPU frequency) and revision 1.1 (XPC604RRXnnnPC). Errata #7 from these earlier revisions is corrected on revision 1.2. The following features are signicantly different from the feature set described in the PowerPC 604 RISC Microprocessor UserOs Manual (order # MPC604UM/AD) or its addendum (order # MPC604UMAD/AD). While they are unchanged from revisions 1.01 and 1.1, they bear repeating here. In-system testability and debugging features through JTAG boundary-scan capability is not guaranteed in these part revisions.
The PowerPC name, the PowerPC logotype, and PowerPC 604e are trademarks of International Business Machines Corporation used by Motorola under license from International Business Machines Corporation. This document contains information on a new product under development by Motorola. Motorola reserves the right to change or discontinue this product without notice.
(c) Motorola Inc. 1998. All rights reserved.
PR
A
Signicant Differences from Hardware Specication
New PVR.; BTAC Disabled New PVR ; BTAC Disabled New PVR ; BTAC Disabled
RY
These part revisions will have different processor version register (PVR) contents. This register is a read-only register that identies the version (model) and revision level of the PowerPC processor. The processor version is 0x000a for revision 1.01 parts and is 0x0009 for revision 1.1 and revision 1.2 parts. The processor revision level for revision 1.01 is 0x0101 and for revision 1.1 is 0x2110 and for revison 1.2 is 0x2120. This change was made for software compatibility with other members of the 604e family of microprocessors. The revision 1.1 and revision 1.2 parts have the Branch Target Address Cache (BTAC) disabled.
Ordering Information
The following table provides the ordering information for the unique 604e part numbers described herein. Ordering Information for the PB-604e Microprocessor
Package Type 255 CBGA Device Rev 1.2 Process HIP4.0 Mask Code 74H76K CPU Frequency (MHz) 250 MHz 300 MHz 333 MHz
Note: Per 604E-PE Part Number Specications
Motorola Part Number* XPC604RRX250LD XPC604RRX300LD XPC604RRX333LD
Part Marking
This section provides information on Motorola device marking. Parts are marked as shown below.
PR
EL
MMMMMM WLYYWWZ
Notes:
MMMMMM is the 6-digit mask code WLYYWWZ is the traceability code
Motorola Part Marking for BGA Devices
Information in this document is provided solely to enable system and software implementers to use PowerPC microprocessors. There are no express or implied copyright licenses granted hereunder to design or fabricate PowerPC integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. OTypicalO parameters can and do vary in different applications. All operating parameters, including OTypicalsO must be validated for each customer application by customerOs technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Afrmative Action Employer. IBM is a registered trademark of International Business Machines Corporation.
IM
XPC604RRX250LD
BGA
IN
A
RY

▲Up To Search▲

Price & Availability of XPC604RRX333LD

	To Download XPC604RRX333LD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .